New Product From Rayburn The 345W Cooker

Tuesday 1st April 2008

Interest and demand for low-carbon fuelled products continues to be strong, as a result Rayburn have launched a new member of the family, known as the 345W

Rayburn 345W - Technical Information

Although based on the 355SFW it has been specifically developed to burn only wood logs, and will therefore qualify for a low rate of VAT under the government's new scheme, where the cooker forms part of a full installation package to the customer.

It offers the same features and benefits as the 355, having a main cast iron oven and lower, steel warming oven, large graduated hotplate, mild steel boiler and thermostatic control for the heating mode.

As a result of stringent independent testing HETAS approval and listing has been given.

Performance based on a 1.5hour refuelling period. Outputs will vary according to factors such as type of wood, moisture content and refuelling frequency.

FuelModeTotal (kW)To Space (kW)To Water (kW)Flue Gas Mass Flow
Wood LogsWinter10.53.76.814.6 g/s
Summer10.44.16.314.5 g/s

The reciprocating grate has two baffle plates located at the rear of the firebox to increase the flat surface area and thus maximise the performance of wood firing. Use of the external riddling mechanism is not required. Mineral solid fuels should not be burned. It is not suitable for use in smoke control areas.

Solid Fuel Grate

Installation requirements are the same as for the 355SFW.

Plumbing system to be open vented, gravity domestic hot-water with pumped central-heating. Pipework connections 28mm diameter Cylinder capacity 190litre Flue system connection 150mm diameter Main chimney system minimum diameter 185mm If using a twin-wall flue system it should be specifically suitable for multi-fuel use.

View other news from April 2008